Wagner INOXLINE d.o.o. - Matic inženjering
  • Upravna zgrada: Sedam sekretara SKOJ-a br.40
  • Proizvodnja: L324, Poskurice, Srbija, 34 000 Kragujevac

INOXLINE d.o.o. - Matic inženjering

INOXLINE d.o.o. – Manual plant for painting fences and accessories with powder coatings
That’s right, Republic of Serbia

Manual plant for painting fences and accessories for buildings with powder coatings. The facility consists of a dryer / curing oven and a painting booth and all these units are united by a manual
transport system of the manufacturer “RAILTEHNIEK GmbH". The cabin is of the chamber type (Dimensions 6.0 x 2.0 x 3.0 m) connected to the FILTER GROUP WAGNER BASIC 8000 x 2 kpl of 8,000 m3/h. The cab has a ventilation system that pulls dust sideways in front of the operator’s seat. Painting is done with WAGNER SPRINT X AirFluid manual painting devices. At the transport loading station there is a cassette that can accommodate a maximum of 5 stretchers with a total load capacity of 2500 kg. The transport system is intended for the products to be heated at 230 degrees before painting, after which they pass through the cabin for powder paints and from the other side of the furnace they are again brought into the furnace with the help of a cassette system for powder polymerization. The transport system is such that it can be used clockwise and vice versa. The maximum dimensions of the pieces are 7.0 x 1.6 x 2.3 m, and the maximum load per carrier is 500 kg.